Ozone SP-540

High performance, slump retention & accelerated hardening concrete admixture.


Download “Ozone SP-540 Flyer”

Ozone_SP-540.pdf – Downloaded 164 times – 408.48 KB
Description Ozone SP-540 is a highly effective water reducing admixture and super-plasticizer to produce high quality,
free-flowing concrete. The dual action of Ozone SP-540 provides excellent slump retention and promotes
accelerated hardening with high early and ultimate strengths. Suite able for use in cold and hot climatic
Primary Application Cold weather concreting.
Hot weather concreting.
Structural concrete.
Concrete block.
Concrete pipe and many pre-cast items.
High strength concrete.
Self compacting concrete (SCC), super workable flowing concrete and high workability concrete.
Extremely fluid, flowing concretes can be produced at very low water to cement ratios providing
ease of mold filling and less workmanship where access or dense reinforcement can be a
Advantages Substantial improvement in workability without increased water.
Long-lasting control of slump loss.
It provides high early strength for fast form stripping.
Specially suitable for hot & cold climates.
Densifies concrete.
Minimizes bleeding and segregation.
Specifications Complies with ASTM C-494,Type F & G.
Packaging 210 Ltr. drums, 1000 Ltr. totes and bulk.
Storage Store in a dry and cool place below 35°C. Protect from direct sunlight.
Shelf life 12 months if stored properly in original unopened packaging.
Appearance Brown liquid
Specific gravity 1.18 at 20°C
Chloride content Nil to BS 5075
Air entrainment Less than 2% at normal dosage
Instruction for use Dosage: 0.8-2.5 Ltr/100kg of cement. It is advisable to carry out trial mixes to establish the exact dosage
rate required.
Dispensing: Ozone SP-540 should be added to gauging water prior to its addition to the dry mix
concrete or separately to the freshly mixed concrete. When added separately to the freshly mixed
concrete further mixing time of 2-3 minutes should be given.
Placing: The standard rules of good concreting practice for production and placing must be observed
when using Ozone SP-540 concrete.
Curing: Fresh concrete must be cured properly. Use Ozone CureCrete or wet hessian.
Compatibility: Ozone SP-540 is compatible with all types of cement.
Effect of overdosing: When accidental overdosing occurs, the retardation of initial set air content and
workability increases. During this period the concrete must be kept moist in order to prevent premature
drying out.
Technical Support Ozone offers technical support, services to consultants, end-users, and contractors. We also provide
technical assistance on site.
Cleaning & Disposal All tools and equipment should be washed with water immediately after use. Do not dispose of into water
or soil but according to local regulations.
Precautions/Limitations Do not allow freezing. Shake well before use.
Health & safety In case of contact with the skin, wash immediately with soap and water, In case of contact with the eyes rinse
immediately with plenty of water and seek medical advice. If swallowed seek medical attention
immediately, do not induce vomiting. Skin barrier cream, safety goggles, and rubber gloves are

WARRANTY: Ozone products are guaranteed against defective materials and manufacture and are sold subject to their standard terms and conditions of sale. Ozone makes no warranties, implied or otherwise, as to the merchantability or fitness for ordinary or particular purposes of its products and excludes the same. If any Ozone product fails to conform to this warranty, Ozone will replace the product at no cost to the Buyer. Replacement of any product shall be the sole and exclusive remedy available and the buyer shall have no claim for incidental or consequential damages. Any warranty claim must be made period from the date of the claimed breach. Ozone does not authorize anyone on its behalf to make any written or oral statements which in any way alter Ozone’s installation information or instructions in its product literature or on its packaging labels. The user of the Ozone products must test the products for suitability for the intended application and purpose before proceeding with the full application of the products.