Download “Ozone PC-1460 Flyer” Ozone_PC-1460.pdf – Downloaded 97 times – 408 KB
|Description||Ozone PC-1460 is a ready to use polycarboxylate based, high range water-reducing admixture for concrete. Ozone PC-1460 increases early concrete strength as well as ultimate strength. Ozone PC-1460 can be used to produce increased concrete slump or to significantly reduce water demand for a specific slump. Ozone PC-1460 can be added at the plant or job site.|
|Primary Application||High-performance concrete.
Low water/cement ratio concrete.
High early & ultimate strength applications.
|Advantages||Substantial improvement in workability without increased water.
Long-lasting control of slump loss.
It provides high early strength for fast form stripping.
Specially suitable for hot climates.
Minimizes bleeding and segregation.
|Specifications||Complies with ASTM C-494 Type F & G.|
|Packaging||210 Ltr. drums, 1000 Ltr. totes and bulk.|
|Storage||Store in a dry and cool place below 35°C. Protect from direct sunlight.|
|Shelf life||12 months if stored properly in original unopened packaging.|
|Instruction for use||Dosage: 0.5-1.5 Ltr/100kg of cement. It is advisable to carry out trial mixes to establish the exact dosage
Dispensing: Ozone PC-1460 should be added to gauging water prior to its addition to the dry mix
concrete or separately to the freshly mixed concrete. When added separately to the freshly mixed
concrete further mixing time of 2-3 minutes should be given.
Placing: The standard rules of good concreting practice for production and placing must be observed
when using Ozone PC-1460 concrete.
Curing: Fresh concrete must be cured properly. Use Ozone CureCrete or wet hessian.
Compatibility: Ozone PC-1460 is compatible with all types of cement.
Effect of overdosing: When accidental overdosing occurs, the retardation of initial set air content and
workability increases. During this period the concrete must be kept moist in order to prevent premature
|Technical Support||Ozone offers technical support, services to consultants, end-users, and contractors. We also provide
technical assistance on site.
|Cleaning & Disposal||All tools and equipment should be washed with water immediately after use. Do not dispose of into water
or soil but according to local regulations.
|Precautions/Limitations||Do not allow freezing. Shake well before use.|
|Health & safety||In case of contact with the skin, wash immediately with soap and water, In case of contact with the eyes rinse
immediately with plenty of water and seek medical advice. If swallowed seek medical attention
immediately, do not induce vomiting. Skin barrier cream, safety goggles, and rubber gloves are
WARRANTY: Ozone products are guaranteed against defective materials and manufacture and are sold subject to their standard terms and conditions of sale. Ozone makes no warranties, implied or otherwise, as to the merchantability or fitness for ordinary or particular purposes of its products and excludes the same. If any Ozone product fails to conform to this warranty, Ozone will replace the product at no cost to the Buyer. Replacement of any product shall be the sole and exclusive remedy available and the buyer shall have no claim for incidental or consequential damages. Any warranty claim must be made period from the date of the claimed breach. Ozone does not authorize anyone on its behalf to make any written or oral statements which in any way alter Ozone’s installation information or instructions in its product literature or on its packaging labels. The user of the Ozone products must test the products for suitability for the intended application and purpose before proceeding with the full application of the products.